Customer Support
0
Close

Categories

Filters

    LabJack T8 - The new flagship DAQ from LabJack USA

    €1.400,-
    €1.289,40Excl. tax Product is in stock : We ship immediately !
    LabJack T8 - The new flagship DAQ from LabJack USA... Show more
    • B2B Industrial Supplier since 1999
    • Shipping from our own warehouse in NL !
    • Shipping in EU with DPD Traceable
    • Reliable SSL & Secure Payments

    Product description

    LabJack T8, Isolated, Simultaneous, High Speed Analog & Digital Measurements

    The LabJack T8 is the new flagship device, capable of collecting signals from virtually any kind of sensor. With instrumentation amplified inputs, software selectable gain settings, many digital I/O features, and a Modbus TCP front-end, the T8 is LabJack's most versatile multifunction DAQ platform. Common applications include sampling large industrial signals requiring electrical isolation and/or precision timing including EV battery testing, industrial control and monitoring, automated testing, and prototype development. Additionally, T8 devices are capable of stand-alone operation by running Lua scripts and include 5x more space for Lua scripts than other T-Series devices.

    Features 

    • 8x isolated analog inputs (AIN) with simultaneous sampling.
    • ±1 kV AIN isolation channel-to-channel and channel-to-ground.
    • Top performance for thermocouples, load cells, bridge circuits, and more.
    • 8x 24-bit ΣΔ ADCs (up to 40k samples/s/ch).
    • 10+ AIN voltage ranges: ±11V, to ±0.18V.
    • 2 analog outputs (16-bit, 0-10V) with 20 mA drive.
    • 20 digital I/O similar to the T7.
    • Lua scripts are faster with 5x the code space than the T7.
    • 3.3V fixed voltage outputs for excitation.
    • Supported by LJM. LabJack's free, 3rd generation, cross-platform driver/library/API for simplifying device communication.
    • Industrial temperature range (-40 to +85C).
    • USB & Ethernet.
    • Built-in Power over Ethernet (PoE), or power through USB connection.

    T8 Analog Input Features

    • 8 Fully Isolated, differential Analog Inputs built in 1kV channel-to-channel and channel-to-ground isolation
    • 24-bit high-speed ADC (up to 40,000 samples per second per channel) (Appendix A-1) Simultaneous, independent ADC per channel
      Software Configurable Resolution Settings
    • Voltage Ranges: ±11V, ±9.7V, ±4.8V, ±2.4V,±1.2V, ±0.6V, ±0.3V, ±0.15V,±0.75V, ±0.36V, and ±0.18V (Appendix A-3-3)
    • All analog input features are software programmable by configuring the Analog Input Registers
    • High speed sampling configurable by using Stream Mode. Speeds up to 40kS/s/Ch
    • Low Latency Sampling and Control (less than 1ms) is made easy with Command-Response Modbus messages
    • Easy integration with sensors like thermocouples, load cells, bridges, and more Explore LabJack's Sensor App-Notes

    T8 Analog Outputs

    • 2 analog outputs (16-bit, 0-10V)
    • Waveform generation via Stream Out
    • Source Impedance/Load Current compensated up to 20mA
    • Vout Min -0.0 Vout Max 10.0
    • The DACs on the T8 use additional power systems to output voltage levels above and below the supply. This allows the T8 to output approximately -0.1 to 10 V as long as the supply voltage is within the valid operating range.

    T8 Digital I/O

    • 20 Digital I/O-Use our CB15 Terminal Board for access to all DIO
    • Supports SPI, I2C, and more... (Master Only)
    • up to 9 PWM Outputs with individual phase control
    • up to 9 Pulse Outputs with configurable number, frequency, and width
    • up to 9 Frequency Inputs returning both frequency and period
    • up to 9 Pulse Width Inputs measuring time spent high and low as well as duty cycle
    • up to 3 pairs Line-to-Line Inputs measuring the time between edges on 2 different lines
    • up to 8 High-Speed Counters
    • up to 16 Software Counters with debounce capabilities
    • up to 8 Pairs of Quadrature Inputs
    • Many of these DIO Extended Features share pins and cannot be used at the same time. See the DIO Extended Features section of the T8's datasheet

     

    Specifications

    Article number
    LabJack T8
    SKU
    LabJack T8

    Related Products

    Check It ! Maybe you need this too ...

    CB15
    CB15
    € 33,-€ 30,39Excl. tax
    CB37
    CB37
    € 58,-€ 53,42Excl. tax
    PS12DC
    PS12DC
    € 119,-€ 109,60Excl. tax
    TKAD DIN Rail Mounting Clip
    TKAD DIN Rail Mounting Clip
    € 5,-€ 4,60Excl. tax
    LabJack T8 - The new flagship DAQ from LabJack USA
    € 1.400,-
    € 1.289,40
    Excl. tax
    LabJack T8 - The new flagship DAQ from LabJack USA
    LabJack T8
    Product is in stock : We ship immediately !
    Add to cart

    Recently viewed

    Compare 0

    Add another product (max. 5)

    Start comparison